One PIC Microcontroller Platform Development Board
Develop firmware using Microchip's 8/16/32-bit PIC® Microcontrollers all on one board!
Each device comes preprogrammed with firmware to operate the LCD, LED and capacitive touch pads. In addition to three PIC® Microcontrollers, this board also has a dedicated Real-Time Calendar Clock circuit and is able to run from a single AAA Ultimate Lithium battery.Feature
PIC Microcontrollers
PIC16LF1939-I/PT
PIC24FJ256GA106-I/PT
PIC32MX795F512L-80I/PT
Capacitive Touch Pads
Segmented LCD
Colored LEDs
Single Cell Battery Supply
MCP1640T-I/CH
Real-Time Calendar Clock
1 MCP79410-I/S
PICkit™ 3 Connector
PICtail™ Board Connector
System Requirements:
Software:
· MPLABX V1.00
· .NET Framework v2.0or later (required for 8bit IR Demo GUI)
· MCP2200& SimpleIO-M.dll (required for 8bit IR Demo GUI)
Drivers:
· MCP2200 (Downloaded)
· ZENA Wireless Adapter (Provided)
Compilers ( use latest available versions):
· PIC16 HI-TECH: (developed with v9.83)
· PIC24 C30: (developed with v3.31)
Overview:
This demo board is populated with 8bit, 16bit, and 32bit PIC microcontrollers. Refer to the schematic of the board for more details.
8 bit MCU : PIC16LF1939
16 bit MCU: PIC24FJ256GA106
32 bit MCU: PIC32MX795F512L
OnePIC Demo Board
The demo code consists of:
1. A “base” code which demonstrates the
a. LCD
b. LEDS
c. mTouch
d. Potentiometer
e. Switch
2. Three Wireless Demonstrations, one for each PIC
a. 8bit – Infrared
b. 16bit – RF4CE (Radio Frequency for Consumer Electronics)
c. 32bit – WiFi
The following document is intended as a walk-through guide to using the provided software. Items will be presented in the order they might be presented during a demonstration of the OnePIC board.
Download Schematic